「烏海堆積門」快速門定做免費看現場



Wuhai Accumulation Gate Fast Gate Customized Free View of the Site

 

在采購快速門的整個過程中，其中踏勘現場是十分重要的環節，只有專業的技術人員到現場經過史實地測量和查看，才能夠根據實際情況來的定制生產方案。


In the whole process of purchasing express doors, reconnaissance site is a very important link. Only professional technicians can customize the production plan according to the actual situation when they go to the site for historical measurement and inspection.

這樣才能保證生產出的快速門適用于用戶的安裝場所，才是獨一無二的優質產品。


Only in this way can we ensure that the production of fast doors is suitable for the user's installation site, is the unique high-quality products.


作用用來說，屬于是外行人，因此，簡便是可以在廠家的指導下測量尺寸，但是因為不夠專業，難免會有誤差，對于現場的特殊情況也不好做出明確判斷。


Function is used to say, belong to layman, therefore, simply can be measured under the guidance of the manufacturer, but because not professional, inevitably there will be errors, for the special situation of the scene is not good to make a clear judgment.


所以，在龍盛門業訂購產品，「烏海堆積門」快速門定做免費看現場，因為我們在呼和浩特，包頭，烏海，赤峰，通遼，鄂爾多斯，呼倫貝爾，巴彥淖爾，烏蘭察布，烏蘭浩特，錫林浩特，阿拉善盟等地都設立的辦事處。


Therefore, in order products in Longshengmen, Wuhai Accumulation Gate is customized for free, because we have offices in Hohhot, Baotou, Wuhai, Chifeng, Tongliao, Ordos, Hulunbeir, Bayannaor, Ulanchab, Ulanhaote, Xilinhaote, Alxa League and other places.


如果有用戶需要訂購我們的產品，我們會安排就近的辦事處人員，為您量尺，看現場，制定生產方案。


If users need to order our products, we will arrange the staff of the nearest office to measure, see the scene and work out the production plan for you.


自從快速卷簾門進入國內以來，許多商鋪都選用此門，險些所有的大商場均可見到。快速卷簾門外形雅觀，容易清洗，主要是它本身通明，可以很好的把商店的本質即商店是經營什么產品的，直接的告訴消費者。


Since the rapid curtain door entered the country, many shops have chosen this door, almost all the shopping malls can be seen. Fast curtain doors are elegant in appearance and easy to clean, mainly because they are clear in themselves. They can tell consumers directly the essence of the store, that is, what products the store operates.


生產快速門時查看現場都看什么：


What do you see on the spot when you make the express door?


查看要設備卷簾門現場建筑構造，按照實習環境作出卷簾種類選擇，需要便于安穩設備兩頭機頭板及導軌。對于雙軌雙簾的設備，要考慮每一端兩導軌設備厚度必需達400mm，主機關板的厚度為900mm。


Looking at the construction of the rolling shutter doors on site and choosing the types of rolling shutters according to the practice environment, it is necessary to stabilize the head plates and guide rails at both ends of the equipment. For double-track and double-curtain equipment, it is necessary to consider that the thickness of the equipment of two guideways at each end must be up to 400 mm, and the thickness of the closing plate of the main engine should be 900 mm.


對于有水電氣等管橋線架必需穿越卷簾門洞的，能常做法是將管橋線架設備于門洞寬的一側，齊管邊用磚石砌封減小門洞后再測量;或將管橋線架頂門洞頂設備，降低門頭設備方位及降低門洞有用凈高，后用防火卷簾質料進行封堵，有用否決火勢的漫延。


For pipeline bridges with water, electricity, etc., which have to pass through curtain door openings, it is common practice to place the equipment on the wide side of the door openings, seal the door openings with bricks and stones at the side of the pipes, and then measure them; or to put the equipment on the top of the pipe bridges to reduce the orientation of the door head equipment and the useful net height of the door openings, and then seal them with fire-proof curtain material. Blockage, useful to veto the spread of fire.

對于判定規劃好設備兩頭機頭板及導軌方位后開端用卷尺測量門洞，寬=兩頭導軌背部間的距離，高=地上至機頭板頂的距離。若為中裝需加裝封堵，寬=卷簾寬，高=建筑頂部至導軌頂部距離+50mm。


For determining and planning the orientation of the head plate and guide rail of the two ends of the equipment, the opening of the door is measured with tape measure. The width is equal to the distance between the back of the two ends of the guide rail, and the height is equal to the distance from the ground to the top of the head plate. If plugging is needed for middle installation, width = curtain width, height = distance from top of building to top of guide rail + 50mm.


對于犯警則的建筑洞口，要充沛考慮安穩設備兩頭機頭板及導軌(或雙導軌)設備方位后，借用磚石、角鋼、H鋼等質料進行加固或支撐，對于寬度或高度有阻隔的只需減小設備寬度或高度再借助于磚石或防火質料進行封堵。


For the building openings that violate the police rules, we should take full account of the orientation of the head plates and guideways (or double guideways) of the stabilizing equipment, and use masonry, angle steel, H steel and other materials to reinforce or support them. For those whose width or height is obstructed, we only need to reduce the width or height of the equipment, and then use masonry or fire-proof materials to block them.