「烏海快速門」HOLIP海利普快速門變頻器編碼器/機械限位接線調試



Debugging of Encoder/Mechanical Limited Wiring of "Wuhai Fast Gate" HOLIP Fast Gate Converter

HOLIP快速門變頻器機械限位調試



Mechanical Limit Debugging of HOLIP Fast Gate Inverter

快速門的限位，也就是決定快速門的上升和下降位置的設置。



The limit of the fast door is the setting that determines the rising and falling position of the fast door.




它需要限位裝置與控制系統的緊密配合，有機械限位和編碼器限位，編碼器又增量式和絕對值兩種。



It needs the close cooperation of limit device and control system, including mechanical limit and coder limit, and encoder has incremental and absolute value.

另外，不同品牌的變頻器，限位調試方法也是不同的。



In addition, different brands of converters, limit debugging methods are also different.




今天，我們以海利普HOLIP快速門變頻器門為例，為您介紹它的機械限位的調試方法。



Today, we take the Heilip HOLIP Fast Gate Inverter Gate as an example to introduce the method of adjusting its mechanical limit for you.




在一樘快速門當中，有很多十分重要的配件，比如變頻器，電機，限位器，紅外防砸等。



In a fast door, there are many very important accessories, such as frequency converter, motor, limiter, infrared anti-smash and so on.




不同的生產廠家，在配件方法都有些差異，不過，即便是品牌、型號上有所不同，及功能還是一樣的。



Different manufacturers have some differences in accessories methods, but even in brand, model, and function are the same.




「烏海快速門」HOLIP海利普快速門變頻器編碼器/機械限位接線調試



Debugging of Encoder/Mechanical Limited Wiring of "Wuhai Fast Gate" HOLIP Fast Gate Converter




變頻器出廠值為機械限位開關模式（C31.05=1），安裝后即可使用。



Frequency Converter Factory value is mechanical limit switch mode (C31.05=1), can be used after installation.




根據需要調整以下參數：



Adjust the following parameters as needed:




參數號



Parameter number




C31.05 選擇控制模式 C31.05=1



C31.05 Choose Control Mode C31.05=1




C31.00 下降延時時間設定 出廠值 5(5S)



C31.00 Decline Delay Time Set Output Value 5 (5S)




C31.01 上升低速運行時間 出廠值 1.0(1S)



C31.01 Increase Low Speed Operating Time Output Value 1.0 (1S)




C31.02 下降低速運行時間 出廠值 1.0(1S)



C31.02 Decreases the Output Value of 1.0 (1S) for Low Speed Operation Time




C31.12 上升高速頻率設定 出廠值: 50HZ



C31.12 Rising High Speed Frequency Setting Output Value: 50HZ




C31.16 下降高速頻率設定 出廠值: 35HZ

C31.16 Down High Speed Frequency Set Out Value: 35HZ




注:門關閉時光電開關無效的接線----X5、X0



Note: Invalid connection of photoelectric switch when door is closed - X5, X0




本公司批發快速門電機，電控箱，編碼器，雷達，地感器，紅外對射，機械限位等



Our company wholesale fast door motor, electronic control box, encoder, radar, ground sensor, infrared radiation, mechanical limit, etc.




如您需訂購快速門配件，或有技術問題需要解答，歡迎致電13940183063.



If you need to order fast door accessories or have technical questions to answer, please call 13940183063.